Remote configuration

This section guides you in the efficient initial configuration of a large number of devices for live tracking in Racemap remotely.

Initial configuration of Queclink GL3xx series

We recommend utilizing bulk SMS sending from your SIM platform.

• Insert your SIM cards into the devices.

• Turn on the devices.

• Place devices outdoors for mobile reception.

• Wait 10 minutes and proceed with steps A to D. (Step A is not required if the device password is gl320m, gl310m, and gl300m corresponding to the device type. Proceed to step B)

A) SMS - Set device password

If the previous owner changed the password, set the required password. To set a new password, you need to know the <old_password>. Send the command via SMS.

GL320M

AT+GTCFG=<old_password>,gl320m,gl320m,0,0,1,5,003F,,,3FFF,0,0,1,3600,2,0,,1,0000,0,20,0,,FFFF$

GL310M

AT+GTCFG=<old_password>,gl310m,gl310m,0,0,1,5,003F,,,3FFF,0,0,1,3600,2,0,,1,0000,0,20,0,,FFFF$

GL300M

AT+GTCFG=<old_password>,gl300m,gl300m,0,0,1,5,003F,,,3FFF,0,0,1,3600,2,0,,1,0000,0,20,0,,FFFF$

B) SMS - Address Racemap server, set APN of SIM provider

domain racemap.com port 5000

Send the command via SMS to set the APN of your SIM provider (replace <your_APN>) and Racemap server.

GL320M

AT+GTBSI=gl320m,<your_APN>,,,<your_APN>,,,0,2,0,1,,,,,FFFF$AT+GTSRI=gl320m,3,,1,racemap.com,5000,racemap.com,5000,,10,1,1,0,60,,FFFF$

GL310M

AT+GTBSI=gl310m,<your_APN>,,,<your_APN>,,,0,2,0,1,,,,,FFFF$AT+GTSRI=gl310m,3,,1,racemap.com,5000,racemap.com,5000,,10,1,1,0,60,,FFFF$

GL300M

AT+GTBSI=gl300m,<your_APN>,,,<your_APN>,,,0,2,0,1,,,,,FFFF$AT+GTSRI=gl300m,3,,1,racemap.com,5000,racemap.com,5000,,10,1,1,0,60,,FFFF$

Send the command via SMS if the APN access of your SIM provider requires a user and a password. Replace <APN_user> and <APN_password>.

GL320M

AT+GTBSI=gl320m,<your_APN>,<APN_user>,<APN_password>,<your_APN>,<APN_user>,<APN_password>,0,2,0,1,,,,,FFFF$AT+GTSRI=gl320m,3,,1,racemap.com,5000,racemap.com,5000,,10,1,1,0,60,,FFFF$

GL310M

AT+GTBSI=gl310m,<your_APN>,<APN_user>,<APN_password>,<your_APN>,<APN_user>,<APN_password>,0,2,0,1,,,,,FFFF$AT+GTSRI=gl310m,3,,1,racemap.com,5000,racemap.com,5000,,10,1,1,0,60,,FFFF$

GL300M

AT+GTBSI=gl300m,<your_APN>,<APN_user>,<APN_password>,<your_APN>,<APN_user>,<APN_password>,0,2,0,1,,,,,FFFF$AT+GTSRI=gl300m,3,,1,racemap.com,5000,racemap.com,5000,,10,1,1,0,60,,FFFF$

C) Upload devices to Tracker Management

With step(s) (A to) B the devices are configured for the communication with Racemap server. Read how to add the devices to the Tracker Management for further messaging.

Add GPS trackers

D) Load configuration for your devices

Select the devices, and choose "Update Settings" message. This command loads a hosted configuration file. Use Racemap configuration URL or paste your URL to load the initial configuration file.

The "Update Settings" command loads a hosted configuration file.

Initial configuration of LK106

Set up your SIM cards

Insert a SIM card into LK106 GPS tracker

• Insert your SIM card into the devices.

• Turn on the GPS tracker.

• Place the device outdoors for mobile reception.

• After 5 minutes send SMS commands, replace <your_APN>, <APN_user>, and <APN_password> corresponding to your SIM provider

SMS Command
set APN	apn123456 <your_APN>
set user, if available	apnuser123456 <APN_user>
set password, if available	apnpasswd123456 <APN_password>

Address Racemap server

Send SMS command to set IP and port of the Racemap server. Replace <password> with the password of your devices. Default password for LK106 (123456).

adminip<password> 116.203.167.141 5000